In this paper, MIL-53(Al) was synthesized by solvothermal method and its application as an adsorbent to remove rhodamine B from aqueous solution. The material was characterized using X-ray diffraction, Fourier-transform infrared spectroscopy, nitrogen adsorption-desorption isotherms, and scanning electron microscopy. The results show that the material has a large specific surface area (1028.3 m2/g). The rhodamine B adsorption on MIL-53(Al) occurs very quickly in the first minutes of contact. Two pseudo-first order and pseudo-second order adsorption kinetic models, and two adsorption isotherm models, including Langmuir and Freundlich, were used to analyze the adsorption data.

Through assessment of surface water quality at Siep stream in Di An city, Binh Duong province. Siep Stream is a level 1 tributary that flows into Dong Nai River. Dong Nai River is currently being exploited and used for domestic water supply purposes. Sampling location of Siep stream at the culvert on National Highway 1K from January 2022 to November 2023, through statistical monitoring data compared with QCVN 08-2023/BTNMT (level A) and QCVN 08: 2015/BTNMT (column A2) - National technical regulation on surface water, it shows that the parameters increase or decrease without stable, most tend to increase with about 86.9% COD exceeding the standard 1.0 ÷ 7.8 times, 95.6% SS parameters exceeding the standard 1.8 ÷ 30.4 times, 95.6% N-NH4 number exceeds the standard of 0.16 ÷ 21.8 times, 52.1% of N-NO2 parameters exceed the standard by 0.52 ÷ 8.9 times, 65.2% of P-PO4 parameters exceed the standard by 0.35 ÷ 6.25 times, 91, 3% of Colifrom parameters exceeded the standard of 1.0 ÷ 3.3 times. The WQI (water quality index) results show that the surface water quality of Siep stream is mostly average, this result is not suitable for domestic water supply purposes, there needs to be solutions to improve water quality at the area Siep Stream.

In recent times, there has been a rapid surge in the advancement of technologies associated with Unmanned Aerial Vehicles (UAVs), particularly in the domains of sensors, networking, and processing. Consequently, substantial investments from both governments and industries have been directed towards the exploration of UAVs, aiming to enhance their performance for secure and dependable deployments. The evolution of design methodologies and the exploration of UAV systems have transitioned from single UAV applications to encompass multi-UAVs and cooperative UAV systems. These systems necessitate a heightened level of coordination and collaboration to execute tasks, demanding innovative networking models, approaches, and mechanisms tailored for highly mobile nodes, encompassing numerous intricate parameters and constraints. The present paper provides comprehensive insights and conducts a meticulous examination of UAV communication protocols, networking systems, architectures, and applications. Furthermore, it delves into UAV solutions while underscoring critical technical challenges and unresolved research issues that warrant further investigation and dedicated research and development endeavors. In this paper, we study some problems and solutions for The Command and Control (C2) aspect of UAV communication systems. We also give some directions for research in near future.

The Covid pandemic and economic recession have seriously affected the business and production activities of businesses. This article proposes the application of Lean manufacturing to identify waste and propose solutions to reduce waste at Protrade Garment Joint Stock Company. In this study, tools in Lean and JIT were used to identify waste in the production process and calculate the cost of losses caused by waste. Research results have reduced waste due to transportation and help Protrade Garment Joint Stock Company increase its competitiveness in the market. Keywords:Lean, waste, cost , 5S.

E-learning has many exceptional advantages in teaching and training, and it has been applied in many universities and colleges in Dong Nai with a variety of scopes and levels; especially at a time with the motto "learning everywhere at any time", Dong Nai province sees this as a good opportunity to accelerate digital transformation in education. Simultaneously, underlining that online teaching is not only a temporary solution during epidemic seasons, but also an important way to improve educational quality. The research is carried out to examine the realities of online training in higher education in order to satisfy the demands of society's need for high-quality human resources. In addition, lecturer questionnaire and student questionnaire design would be used to collect quantitative data to answer research questions through the employment of questionnaire. The survey result showed that an average score of 4.03 to 4.19 with the “agree” level in student survey and another 4.19 to 4.29 in lecturer survey. It is indicated that the attitudes of students and lecturers on the survey items are very similar through two surveys. As a result, e-learning plays an important role in conveying the knowledge to all students at anytime and anywhere.

Applying the AQI ( Air Quality Index) to evaluate the current air in 03 research areas: Go Dau Industrial Park, Long Thanh Industrial Park, and Binh Son commune in Long Thanh district. From there, create a table comparing the air quality of these three areas over the years from 2017 to 2020. On that basis, propose solutions to control and improve air environmental quality in the research areas. Assessment results can be used as a data source to build air quality zoning maps. Provide environmental information to the community in a simple, easy-to-understand, and intuitive way. It helps raise ecological awareness. The primary method used in this study is the method of calculating the air quality index Vn_AQI issued by the Vietnam Environment Administration.

Industrial robots have become one of the effective support tools for human labor. Robots are a solution to replace humans in repetitive tasks and in environments where humans cannot work. Robots have become one of the factors responding to the Industrial Revolution 4.0. Automatic control devices require high-precision control quality. Therefore, in this paper, we focus on researching controlling the position of the actuator accurately based on the PID algorithm. First, we study the forward and inverse kinematics of a three-joint robot. Second, we design the robot model on inventor software and transfer the 3d model in inventor software to Matlab Simmechanics. Third, modeling robot model on Simulink to simulate and evaluate the results achieved

In the accelerating pace of globalization and internationalization of trade, professionals from a wide range of organizations believed that English as an international language, which is a way of thinking, researching and practicing, was used in almost all areas of life, study, and work. That’s why the study's foremost objectives were to comprehend reading learning strategies used by English-majored students at Thu Dau Mot University. A quantitative method was used to conduct the research with a questionnaire divided into four parts. The subjects of this study are 100 English majors from the Faculty of Foreign Languages at Thu Dau Mot University. According to the results, the majority of students agree with the difficulties faced when learning English reading. Likewise, students also subscribe that they also use some reading learning strategies such as extensive reading strategy, the phonics strategy, the whole language strategy, reading comprehension strategy and vocabulary building strategy. Moreover, some solutions, such as the function of the word in the sentence, the main gist, guessing the unfamiliar word and reading aloud are recommended to them to read more effectively and improve their reading ability. Ultimately, some recommendations are made in the hope of helping both teachers and students. Keywords: challenges, English reading, reading learning strategies, Thu Dau Mot University

This work presents a benchmarking study between Lagamine, an in-house developed finite element (FE) code, and COMSOL Multiphysics® (Comsol) commercial software in thermal analyses to investigate their capability in modeling complex manufacturing processes. For this purpose, two case studies, including a NAFEMS benchmark for heat transfer with convection and a Directed Energy Deposition (DED) of a bulk sample, were used as test cases. The simulation models using Lagamine and Comsol solvers for each case were described. The underlying algorithms and theories, as well as the soft-ware development, are investigated. The computational results indicate slight differ-ences between Lagamine and Comsol solutions in both case studies. For the NAFEMS test case, the results obtained with Comsol solver appear to be less dependent on the mesh size than those obtained with Lagamine. For the DED test case, within the chosen configurations of Lagamine and Comsol codes, the maximum difference in the highest peak temperatures obtained from the two codes is about 20%. From an engineering point of view, it is suggested to determine parameters of the FE model consistently with the selected FE code to provide the best match with experimental observations.

Van Phuc 2 General Hospital is one of the hospitals that is always concerned about environmental protection in medical checkups and treatment. However to affirm and enhance the prestige is a regional hospital in the region, step by step approaching the hospitals around the world. Therefore, the subject "Proposing solutions to remedy meaningful environmental aspects at Van Phuc 2 General Hospital" is important to building a sustainable hospital development image. The subject focuses on the plan to develop the environmental management system by ISO 14001: 2015 based on the current management status of the hospital By the 3P and 4T methods, the criteria and methods of analysis and field survey were identified, There were five Environmental aspects at the hospital by followings: smells, dust, exhaustion, wastewater, infectious waste, and clinic waste. In addition, the subject also establishes objectives, environmental criteria, planning, resource-building procedures, communication systems, document systems, etc., to complete the environmental management system by ISO 14001: 2015 for the hospital. At the same time make recommendations to help the hospital can complying with all requirements when building an Environmental Management System. Keywords: Environment; Environmental aspects, hospital, solution

The study was undertaken to compare the lead accumulation and removal of Dracaena sanderiana, Dracaena reflexa, and Dracaena deremensis on artificial lead solutions to apply plants in lead pollution treatment. The experiment consisted of 6 treatments corresponding to 3 investigated species of Dracaena. Each treatment was grown on 2 types of solution with Pb and without Pb used as control. The results indicated that the growth of D. sanderiana, D. reflexa, and D. deremensis was not affected at Pb concentrations of 100 ppm. All three plant species had the ability to absorb and accumulate Pb. In which D. sanderiana was a typical lead excluder because the lead concentration in roots (1952.14 mg/kg), shoots (221.78 mg/kg), and leaves (166.46 mg/kg) of the plants were the highest among the three plants tested. The most of lead accumulated in the root, and transportation of lead in D. sanderiana, D. reflexa, and D. deremensis from root to shoot was restricted. Besides, the highest % removal of Pb was found at D. sanderiana (93.16%) and the minimum of 66.77% at D. reflexa. D. sanderiana is the best choice among the three Dracaena species used for phytoremediation of lead contaminated wastewater.

This paper is devoted to the study of a nonlinear fractional differential equation with a weakly singular source in Banach space. Using Bielecki type norm, we show that the problem has a unique solution. Furthermore, we introduce a result of the new Ulam-Hyers type stability for the main equation.

Binh Duong, a dynamic province in the Southern Key Economic Region in Vietnam, has a fast growing economy and strong economic restructuring towards industrialization and modernization, have affected many aspects of economy, culture, society and environment. This study analyzes the influence of economic restructuring on urban development in Binh Duong province by utilizing the time series data throughout 2000 - 2020 and the household interview method of the topic "Urbanization and its effects on land use restructuring in Binh Duong province" shows the shift of occupations from agriculture to non-agriculture. The research results show that economic restructuring contributes to promoting economic and social development in general and expanding the urban network of Binh Duong province in particular, but it has some limitations in the process of development. Therefore, Binh Duong wants to successfully integrate into the world economy and develop urban areas towards sustainability (by 2030), it must have specific, scientific and objective analysis and evaluation on the success and limitations of the economic restructuring process and its impact on the urban system in recent times. The research results also have a scientific basis for proposing appropriate and effective solutions and policies to successfully implement the goals and orientations of economic restructuring and urban development that Binh Duong has been approved.

Through analysis of the DPSIR model, combined with research methods such as field surveys, and survey questionnaires, the author has given the following results: The amount of waste is increasing; Not paying attention to the classification at source, Solid waste collection is still limited; Environmental quality is degraded due to the stench caused by domestic waste in some neighborhoods; The soil environment is polluted due to solid waste treatment that is difficult to decompose; Surface water and groundwater are also leaked due to leachate, wastewater from landfills; The polluted environment has, directly and indirectly, affected the health and production and business activities of the people in the ward, degraded the ecosystem, and lost the urban beauty. The author has proposed solutions to reduce environmental pollution caused by domestic waste such as population policy, establishing collection groups, craft village planning, and applying the circular green model in economic development.

This paper aims to apply FMEA (Failure Mode and Effect Analysis) tool in the wood production process of Minh Duong Wood Company. In this study, the process evaluation indicators according to FMEA were analyzed such as failure severity - S (Severity value), failure frequency - O (Occurrence number), error detection ability. failure - D (Detection number), risk priority factor - RPN (Risk Priority Number). The research results show that the failure modes of the process have been systematically and comprehensively identified. Fault types are ranked as priority for improvement and corresponding solutions have been proposed.

Selecting wastewater treatment technology is not an easy matter. In this study, TOPSIS and AHP methods are used to support decision-making in choosing a wastewater treatment alternative for Poong In Vina factory. A total of 9 criteria belonging to 3 groups of economic, social - technical and environmental issues were used to select an alternative. The results of TOPSIS and AHP analysis showed that aerobic biotechnology integrated with membrane bioreactor technology is the optimal solution. The outcomes of this study will help the company in choosing the best option among these technologies. Furthermore, it will provide an insight for relevant stakeholders such as engineers, manufacturers and other ogranizations for making decisions.

In this paper, we consider the Robin-Dirichlet problem for a system of nonlinear pseudoparabolic equations with viscoelastic term. By the Faedo-Galerkin method, we first prove the existence and uniqueness of solution for the problem. Next, we give a sufficient condition to get the global existence and decay of the weak solution. Finally, by the concavity method, we prove the blow-up result of the solution when the initial energy is negative. Furthermore, we establish here the lifespan of the solution by finding the upper bound and the lower bound for the blow-up time.

In this paper, the Neumann-Dirichlet boundary problem for a system of nonlinear viscoelastic equations of Kirchhoff type with Balakrishnan-Taylor term is considered. At first, a local existence is established by the linear approximation together with the Faedo- Galerkin method. Then, by establishing several reasonable conditions and suitable energy inequalities, the solution of the problem admits a general decay in time.

This paper is devoted to the study of a Kirchhoff wave equation with a viscoelastic term in an annular associated with homogeneous Dirichlet conditions. At first, by applying the Faedo-Galerkin, we prove existence and uniqueness of the solution of the problem considered. Next, by constructing Lyapunov functional, we establish a sufficient condition such that any global weak solution is general decay as t → +∞.

In the current work, we study a Cauchy problem for a time-fractional pseudo-parabolic equation with a globally Lipschitz source term. We prove the unique existence of a mild solution to the problem, by the common Banach fixed point theorem. This solution is then verified that exists globally in time by Gr¨onwall’s inequality. Compare to previous works about the similar issuse, we approach in a way that does not require using weighted spaces. Although our approach share a similar spirit to previous studies, our method seems to be more precise and natural.

In this paper, we consider the Dirichlet problem for a wave equation of Kirchhoff- Carrier type with a nonlinear viscoelastic term. It consists of two main parts. In Part 1, we establish existence and uniqueness of a weak solution by applying the Faedo- Galerkin method and the standard arguments of density corresponding to the regularity of initial conditions. In Part 2, we give a sufficient condition for the global existence and exponential decay of the weak solutions by defining a modified energy functional together with the technique of Lyapunov functional.

The report deals with the Robin problem for a nonlinear wave equation with viscoelastic term. Under some suitable conditions, we establish a high-order iterative scheme and then prove that the scheme converges to the weak solution of the original problem along with the error estimate. This result extends the result in [9].

In this paper, we study the Robin-Dirchlet problem (Pn) for a wave equation with the term 1 n Xn i=1 u2( i−1 n , t), n ∈ N. First, for each n ∈ N, under suitable conditions, we prove the local existence and uniqueness of the weak solution un of (Pn). Next, we prove that the sequence of solutions un of (Pn) converges strongly in appropriate spaces to the weak solution u of the problem (P), where (P) is defined by (Pn) by replacing 1 n Xn i=1 u2( i−1 n , t) by Z 1 0 u2(y, t)dy. The main tools used here are the linearization method together with the Faedo-Galerkin method and the weak compact method. We end the paper with a remark related to a similar problem.

In this paper, we consider the Dirichlet boundary problem for a nonlinear wave equation of Kirchhoff-Carrier-Love type as follow   utt − B ? ∥u(t)∥2 , ∥ux(t)∥2
(uxx + uxxtt) = f(x, t, u, ux, ut, uxt) + Xp i=1 εifi(x, t, u, ux, ut, uxt) for 0 < x < 1, 0 < t < T, u(0, t) = u(1, t) = 0, u(x, 0) = ˜u0(x), ut(x, 0) = ˜u1(x), (1) where ˜u0, ˜u1, B, f, fi (i = 1, · · · , p) are given functions, ε1, · · · , εp are small parameters and ∥u(t)∥2 = Z 1 0 u2 (x, t) dx, ∥ux(t)∥2 = Z 1 0 u2 x (x, t) dx. First, a declaration of the existence and uniqueness of solutions provided by the linearly approximate technique and the Faedo-Galerkin method is presented. Then, by using Taylor’s expansion for the functions B, f, fi, i = 1, · · · , p, up to (N + 1)th order, we establish a high-order asymptotic expansion of solutions in the small parameters ε1, · · · , εp.